No water feed to icemaker

ApplianceWhirlpool Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Wrench set

Robert From Abingdon, MD

Jul 23, 2007

46 out of 61 people found this instruction helpful

To troubleshoot - Check water supply to valve. It f that's good - remove back plate, remove water valve reconnect inlet line, disconnect electrical connector, place valve over a pan with outlet fitting disconnected, temporarily connect 110 VAC with clipleads to water valve solenoid. No water flow means valve is not opening. To install new valve, connect outlet line, and wiring connector, then insert in cabinet and install 2 screws, reinstall back plate, connect water inlet line.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

VALVE-INLT (Now subbed to Single Water Inlet Valve - 120V 60Hz 35W)

Part Number: PS1484648

In Stock