leaked water on the floor, out of balance in spin cycle

ApplianceKitchenAid Washer

Modelkawe577ewh1

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set
Wrench set

Edward From Falls, PA

Jan 11, 2013

1)removed philips screws at sides of control panel 2)lifted up and flipped panel over backward 3) disconnected wiring harness to lid switch 4)removed two snap off connectors at top back of washer with screwdriver 5)remove top lid and side housing as one unit 6) removed removed top lid and side housing and core of washer to driveway 7) ran over unit with an Ingersol Rand 84" smooth drum vibrating roller

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Inner Tub Filter Plug Kit

Part Number: PS334684

$17.97
In Stock

Spin Pinion Seal

Part Number: PS348250

$3.76
In Stock

Centerpost Gasket

Part Number: PS349385

$2.92
In Stock

SEAL-SHAFT

Part Number: PS398941

$3.22
In Stock