I had to replace the drum belt and front drum bearing

ApplianceGeneral Electric Dryer

ModelDCL333EY0WW

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Jay From Sandia park, NM

Jan 11, 2013

First I had to wait about 3 days for the parts to arrive when they got here they were the wrong parts for my dryer had to return them and reorder the right part. The front bearing I needed was a universal bearing that fit a fridgedair dryer as well as the GE I had. When it arrived I set in on replacing the bearing first. The hardest thing about replacing it was removing the old glue under the felt strip. I then applied the new glue and felt bearing strip and held it in place for about a minute, when I thought it was ready to reinstall in the drum I did so. I then installed the drum belt which is a bit easyer. I put the dryer together and did not run it until the next day just to make sure the glue was dry and holding the bearing strip tightly. Then I ran the dryer with a full load it was a bit noisey until the new drum belt broke in. Hope you like my book LOL.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Bearing Slide - White

Part Number: PS755842

$6.14
In Stock

Front Drum Bearing

Part Number: PS960316

$18.13
In Stock

Drum Slide - Green (Now subbed to Drum Bearing Slide)

Part Number: PS6447706

$3.86
In Stock