Old door latch broke

Remove phillips head screws that surround cosmetic cover around handle. Turn off power at breaker. Remove with torx bit, old handle assembly. Unplug four wires that connect it to wiring harness. Plug those same four into new latch assembly. Reattach to the door with old torx screws. Reattach cosmetic cover with phillips screws. Remove old gasket. Install new gasket per included instructions. Find middle mark on gasket and press in. Install bottom of gasket into nitch at bottom of each side. Press gasket in lightly in 4-5 places on each side. Shut door and lean against it to seat gasket. Repeat until gasket is fully seated.