Intermittent water leakage

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

David From Hendersonville, TN

Jan 04, 2013

Removed 6 screws to access the top left area where the water hose brings water into the tub. Photographed the area before disassembling the injector valve and nozzle. Replaced the two parts with the new parts and reassembled. The only real problem was in getting the plastic nozzle properly placed inside the rubber valve. The nozzle was difficult to insert deeply enough to properly position the rubber sleeve on the valve. After a few minutes of working with it and adding some lubricant, and after worrying I would bend or break the plastic nozzle, I got it right. So far, there's been no further leakage.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Plastic Injector Nozzle

Part Number: PS2018687

In Stock

Injector Sleeve

Part Number: PS2019020

In Stock

Rubber Injector Valve

Part Number: PS2019175

In Stock