Washer wouldn't drain post rinse cycle

ApplianceMaytag Washer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

James From Columbia, MO

Dec 31, 2012

First, to make sure it was the timer (and not the drain/pump), I ran the washer on a different cycle. Drained fine. Determined timer to be the cause (in main cycle). Removed the back of the top compartment (where all controls are), and you can access the timer and other controls. Pop the cover off the timer control knob to access the screws holding it in place. Remove the screws, disconnect the wires from behind and remove the old timer. Reverse the process for installation. Washer is 1997 vintage, and still runs great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS2020143

In Stock