Replace upper spray arm mount

ApplianceKitchenAid Dishwasher

ModelKUDS24SE

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Andrew From Davis, CA

Dec 26, 2012

out of people found this instruction helpful

The broken mount was removed with a screwdriver. The replacement was a modified design and had no screw clamp-it just snapped into place. The location on the rack was clear because only one position on the upper rack had the correct spacing between the rack wires. However, once the spray arm was attached with a screwdriver, it was at an odd angle and would not rotate as it ran into the rack. However, removing the mount (required a small screwdriver to press the snaps and release) and reversing it provided the correct angle for the spray arm. The mount needs to project at an angle perpendicular to the UNDERSIDE of the upper rack so that the spray arm rotates parallel to the underside of the rack, not level.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Upper Spray Arm Mount

Part Number: PS734018

$3.81
In Stock