Very Little Heat

ApplianceKenmore Dryer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Socket set

Vincent From Greer, SC

Dec 26, 2012

1) Unplug the unit. 2) Loosen the vent clamp and remove the vent hose. 3) Remove the back cover using either a nut driver or ratchet and socket. 4) Disconnect the wires using a needle nose pliers and remove the screws holding the Heating Element Module in place then remove the heating element module. 5) Remove the Hight Temp Limit Switch from the Heating Element Module. 6) Replace the Heating Element Module and re-assemble the unit by following steps 1 - 5 in the reverse order. Watch the video - it is much simpler than reading and understanding these steps!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Heating Element - 240V 5400W

Part Number: PS334313

In Stock