Level of DifficultyA Bit Difficult
Time to do repair15 - 30 mins
Age of Appliance5 - 10 years
out of people found this instruction helpful
I first purchased the door assembly because the solenoid was fried. That was a fairly easy installation. Unfortunately the door still didn't open. I then purchased a new Electronic Control Board. The installation was again fairly easy. After killing the power I removed the (10) Torx door fascia screws. Then I removed (2) Torx screws holding the control assembly on. Support this assembly to reduce strain on the wires. Slip the two tabs on the left side of the board that retains it. Carefully remove all of the plug connectors. Then reverse the entire procedure and test.
Were these instructions helpful?
Part Number: PS2363020