start button stopped working

ApplianceMaytag Dishwasher


Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Adrian From Lacombe, LA

Feb 01, 2008

1 out of 2 people found this instruction helpful

Removed all of the screws holding the door assembly together. Removed controller cover to access the ribbon cable. Slipped the ribbon cable out of it's connector. Removed the control panel assembly. Installed a new latch handle in the new control panel assembly. Re-assembled the door, being careful to route the wires correctly and place the latch in proper position. Installed all of the screws about half tight. Tighten all the screws bringing the door assembly together a little at the time to prevent warping. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 6-917713 (Now subbed to Control Panel with Touch Pad)

Part Number: PS2340953

In Stock