element sparking and popping and quit working

ApplianceGeneral Electric Oven

ModelJSP34wd1ww

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Michael From Batton Rouge, LA

Dec 06, 2012

First thing I did was turned off breaker to stove. Then I opened oven door to broil position, pulled the door up at that angle and slid off hinges to make it more accessible to work on. Push door hinges to the closed position for safety purposes(reverse this procedure to install door back later). I then unscrewed the two screws that secure the element to the back wall. At this point I detached support clips and used the element to very carefully pull the wires into the oven. I then used my needle nose pliers to hold each of the spade connectors on the wires and pulled the element from the connectors making sure wires don't fall back into the holes. I replaced support clips and carefully slid element back into position and secured it back to the back wall using the two screws, then attached element to the new support clips. I installed the door back, flipped breaker back on and now my oven has a new broiler element in less than 15 minutes. Thanks PartSelect for the speedy delivery and great price.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Single Heating Element Support Clip

Part Number: PS243701

$4.27
In Stock

Broil Element - 240V

Part Number: PS249432

$45.29
In Stock