Gas would come on initially then stop, no heat

ApplianceMaytag Dryer

ModelDG7500

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

John From Fridley, MN

Dec 04, 2012

This turned out to be easier than I thought. I opened the access door on the front of the dryer after unplugging the dryer and turning off the gas. I reached in just inside the door with a short-handled phillips head screwdriver and removed the two screws holding the two coils in place. The screws were pretty tight and a bit difficult to get loose but after serveral attempts they finally broke loose. Once I removed the plate that covered the two coils they just slipped right off, much easier than I thought. I removed the electrical connections then attached the wires to the new coils and slipped them back on their respective pins. I reattached the "cover", then plugged the dryer back in and turned the gas on and started it up. The flame fired right up, much stronger than before I replaced the coils and of course the flame stayed on. Problem solved. Repair was really pretty simple with the diagnosis being the biggest problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Secondary Coil Valve - 3 Terminals (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$13.95
In Stock

Two Terminal Gas Valve Coil (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$13.95
In Stock