Machene performed no washing cycles. SUD and F35 errors on display.

ApplianceWhirlpool Washer


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Svitlana From Springfield, VA

Dec 04, 2012

Unplugged the machene. Removed the top cover (3 screws on back top). The pressure switch is back on the right wall. Turned it clockwise until its top almost pointed forward (at me) and it could be removed. Disconnected if from its wiring (pushed small tab down with my nail and pulled it out); and from the black tube (secured the tube with scotch tape, so that it wouldn't slip down inside the machene while I work). Unpacked the new switch, connected it to the wiring and to the tube, pushed it in place (square(ish) hole) until it clicked, put the top cover back in place (needs to be slid in front) and screwd three bolts holding it into their places.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS3497663

In Stock