Dryer would not start.

ApplianceKenmore Dryer

Model

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set
Wrench(Adjustable)

Philip From Deer Park, IL

Nov 28, 2012

out of people found this instruction helpful

Removed the front lower access panel. Determined main problem was broken drum drive belt. Ordered additional parts due to age of machine. Removed front, rear and top panels of the dryer, electronics panel, drum and lint duct. Also took the time to thoroughly vacuum the components, motors, exhaust and clean duct work. Did not change the drum rollers as those were in very good shape. Reassembled and it immediately started right up. Should be good for another 10 years and I am the wiser for the next project. BTW, did this without a manual. Figure I saved about $400.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Disposable Thermal Fuse - Two Terminal

Part Number: PS344958

$15.00
In Stock

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$13.44
In Stock

Internal-Bias Thermistor

Part Number: PS993287

$22.29
In Stock