Large burner wouldn'cycle to temperature setting

ApplianceKenmore Range


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Russell From Myrtle Beach, SC

Nov 22, 2012

Large burner would cycle on and off per temp setting a few times. Then it would stick on high. Read other problems people had with the burner switch, which helped to determine the problem. Instillation per video was pretty straight forward; but the issue I ran into was when pulling off the wires from old switch, there was a short wire which connected to the indicator light. The abrupt release yanked the wire which caused the lens indicator to snap. So, when you are repairing the switch, be aware if there is enough slack in the wires to prevent that issue

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Light Indicator - 125v

Part Number: PS436960

In Stock

Infinite Burner Switch - 8" - 240V

Part Number: PS1145040

In Stock

Light Lens Indicator

Part Number: PS2342816

In Stock