Water constantly dripped into washer when it was off.

ApplianceRoper Washer

Model

Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers

MARK From MARION, MA

Jan 30, 2008

11 out of 12 people found this instruction helpful

Turned off water and pulled power plug, Then unscrewed hot and cold hoses from washer.
I took off the top control by undoing the 2 screws in front and then the two screws on the back plastic latches. Mover it forware and took off the 2 screws on the bottom of the back which came up and off easily. Undid the two screws holding the Water valve to the back and undid the water outlet tube and the wireing. Replaced with new valve and reattached tubing and wires. Screwed back on and reattached controls.
Actually was very easy even without repair manual to the washing machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Mounting Bracket

Part Number: PS334646

$16.24
In Stock