Oven Did Not Heat

ApplianceFrigidaire Oven


Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers

Sandra From Los Angeles, CA

Nov 17, 2012

out of people found this instruction helpful

The oven began to have low heat and then no heat. Read about it on-line and figured it was the igniter for the oven. Found the model number on stove/oven frame behind the bottom draw. Then I looked at a few on-line videos about how to install the piece. I have a convection oven and had to take the fan cover off to remove the bottom inside cover of the stove and I couldn't figure out how to remove the oven door to make it easier...so I had to leave the oven door on the stove. The stove door is heavy so be aware of that issue. Also I needed help...it was a two people operation. I needed to lay the stove on it's back to get to the piece. I needed to cut the wires and remember where everything went it was as simple as the video made it out to be...there were a few more wire connections. There is the issue of the door ...be careful you can stand the stove up and bring it down again but if not be careful/mindful of the door and it's weight and desire to slam closed...maybe a third person would be good to have around. ;) Anyway it can be done. Have patience. Take your time. Have a buddy to help you. Best part...the oven is now heating!! ;) Lovely!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter

Part Number: PS470129

In Stock