Burners will not light in the light position

ApplianceKitchenAid Range


Level of DifficultyVery Difficult

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers
Wrench set

Wesley From Edgewood, WA

Nov 15, 2012

With no inctructions removed the counter top burner tried to figure out how to remove the glass. Next removed the burners (remember to place the burnersin a open area in the exact order you remoned them from the stove)The burners are not the same. Now the glass was acessiable to remove. The switch harness was easy to replace. Removed one switch at a time noting how the harness was routed.Remember the stove is upside down. First remove the rubber dirt sheild and washed each sheild. Note the key way on the gas adjust shaft there is a knotch on the switch that must be located and pressed in to place. Complete the 5 switches noting not to remove the termination of the harnes until the very last step. That connects to the main power. I had to cut a wire tie and replace to complete the process. Removing a burner takes a star bit to unscrew the burner from the stove top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spark ignition switches and harness

Part Number: PS339482

In Stock

Control Knob

Part Number: PS339626

In Stock