My oven would not ingnite when turned on. I could see the igniter glowing, but it wouldn't get hot enough to open the gas valve.

ApplianceAmana Oven


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Steve From St.Amant, LA

Nov 13, 2012

It was a little difficult, but all in all not to bad. Getting the drip pan out was simple. Just take out all the screws. Oh yea, you will have to take off the bolt in the middle of the deflector. The igniter wire was a little to short, so I had to use needle nose pliers to hold the wire while unplugging and plugging the new igniter. Be careful not to break the delicate igniter. Screwed it all back together and it works just like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter

Part Number: PS2034121

In Stock