the oven had stop heating at any temp above 200

ApplianceKenmore Range

Model629.46779

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Harry From Kaplan, LA

Oct 25, 2012

out of people found this instruction helpful

the 1st thing to remember is to turn off the breaker for the stove then open the oven door and remove the racks and the heating element was there on the bottom undo the screw on each side where the element goes into the back wall of the oven and pull gently out and take your plyers and remove the wire hooked on each end becareful so that the wire does not fall back into the hole place your new element into the oven and plug the wire on the new element and slide it back into the holes and put back the screws and when done you can put the power breaker back on and try it this took less than 15 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element

Part Number: PS2081226

$32.42
In Stock