Squeeking and rattling when loaded

ApplianceMaytag Dryer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

David From Lena, IL

Oct 25, 2012

Removed 2 front panel screws and pulled out bottom to disengage top clips. Unplugged two light wires. Set front panel aside. Remove 4 screws that support the front drum support. Remove panel in back to reveal motor and belt. NOTE HOW BELT IT THREADED AROUND IDLER AND PULLEY. Remove belt from pulley. Remove front drum support and set aside Pulled out drum and set aside. NOTE ORIENTATION OF RIBS ON BELT. Remove snap ring on roller shaft inside of machine. Pull off roller and two washers. Replace 1 washer, 1 roller ,1 washer in that order. Replace snap ring. Replace glides on drum support while apart. Drill out rivets and remove glide assembly. Replace with new parts and put rivet in hole to align. Rivet into place. Make sure glide assembly is seated by forming it to front drum assembly. Align second hole and rivet together. Reassemble in reverse.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Support Roller Kit

Part Number: PS1570070

$19.73
In Stock