5UD and F35 errors, would not run.

ApplianceWhirlpool Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Randy From Monett, MO

Oct 16, 2012

unscrew the top 3 screws that hold the top lid on. Locate the pressure switch on the back right side, near the top. Pop off the pin plug (wire pack)and pull off the black hose. Put the pin plug into the new switch then put the black hose on. I did notice that the new pressure switch was a little bigger than the old one. It did not want to pop into the retainer clip location so I just let it dangle. Its not a problem. Washer works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS3497663

In Stock