The touch pad for ice despencer stopped working

ApplianceMaytag Refrigerator


Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver

W S From Durham, NC

Oct 14, 2012

I peeled back the touch pad which was glued to a backer piece. I them removed two screws that allowed the entire ice dispenser to be freed from the refrigerator door. It also allowed access to a control board. A ribbon cable runs from the touch pad, through the backer and plugs into a connector on the cntrol board. By unplugging the cable the entire touch pad was released. I then fed the ribbon cable on the new touch pad throught the backer and connected it to the board. I then stripped offthe paper backing revealing a sticky surface on the new touch pad. That was stuck to the backer, the cover replaced and two screws reinserted. Job done! The repair shop wante $550 fo rthis repair. I saved nearly $500!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Front Overlay - Black

Part Number: PS2371545

In Stock