Refrigerator not getting cold

ApplianceFrigidaire Refrigerator


Level of DifficultyA Bit Difficult

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Curtis From Pasadena, TX

Oct 03, 2012

Freezer works fine, blows cold air but the refrigerator was warm. In the back corner is a vent register. Disconnect power and use a flashlight. Use a nut driver to remove five screws holding the front control assembly and the side vent register. Photograph the wire colors and locations. The air damper control lifts out freely, there are no screws. There are two pieces of styrofoam. One piece on the vent register is difficult to remove and I left that in place bc it was not broken. I replaced the styrofoal on top of Air Damper. Assembly is reverse order. Works great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Filter

Part Number: PS503619

In Stock

Dispenser Grille

Part Number: PS1148319

In Stock

Air Damper Control - 1 Switch (Now subbed to Damper Assembly - 115V 60Hz)

Part Number: PS7783969

In Stock