Very loud noises during cycle

ApplianceWhirlpool Dishwasher

ModelW10239404

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers
Wrench(Adjustable)

Ronald From Lynbrook, NY

Oct 03, 2012

out of people found this instruction helpful

The very first thing to do is watch the online video. That was the most helpful tool. Once we saw how it should be done. We removed the bottom plate and securing screws. Disconnected the water supply line, electric, waste line and pulled the unit on top of the tarp we set down. We then tuned the unit on its side, removed the old motor, greased the new gasket and re installed. The only problems we incurred were minor. The first being that there was still water in the waste line. That was a bit messy but able to deal with. The second was that the 3/8" nut driver was very difficult to get seated on the locking nut. My wife had to actually pull up on the plastic shield in order to insert the nut driver on the nut. Once that was done, it was a piece of cake. Saved ourselves over $700.00 with this repair. Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Circulation Pump Motor with Impeller - 60Hz 120V

Part Number: PS2363114

$137.62
In Stock