Annoying sqeaking; clothes becoming stuck on doorframe

ApplianceGeneral Electric Dryer

ModelDRSR483GD2WW

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Screw drivers

Steve From Baton Rouge, LA

Sep 30, 2012

The actual repair took only about 1/2 hour. I spent several hours a previous day discerning how to disassemble the dryer. Once this was solved, it was easy. The trick was that, unlike any dryer that I had seen or anything that I found on the internet, there were 2 screws that held the top to the front that are accessable from the dryer door. The top then swivels upward allowing access to 2 screws that connect the front to the sides. The front bottom can then be lifted from a pair of pegs that hold the bottom of the front in place. Removing the plastic in the front was also a bit difficult as I didn't want to put too much pressure and break it but at some point it simply popped out. Reassembly was simply the reverse.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drum Bearing Slide - White

Part Number: PS755842

$6.93
In Stock

Front Drum Bearing

Part Number: PS960316

$18.13
In Stock