This ice maker assembly is for refrigerators.
Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator when installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10251076 replaces these:
AP6017832, W10122576, W10251076
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.9
Filter By Rating:
5 Stars
8
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen M - September 15, 2021
Verified Purchase
went right it.... and works great!
An EXACT replacement of OEM ice maker. higher quality than aftermarket off brands. fit right in, easy to install. Worked right away
★★★★★
★★★★★
Tammy G - July 9, 2021
Verified Purchase
Works great.
The ice cubes are slightly smaller than the one I had before. I love that because they come out of the dispenser more easily.
★★★★★
★★★★★
Gregory W - March 21, 2021
Verified Purchase
We have ice again!
Part went right in and was working immediately. Now I can quit going to buy ice! Thanks part select. Saved me a bunch of money.
★★★★★
★★★★★
James W - January 23, 2021
Verified Purchase
Easy install, worked better than expected
Part arrived when expected. Had watched the youtube installation video on website before part arrived. Had no problems with removeable of old icemaker and installation of new unit went without a hitch. Is making sufficent amounts of ice.
★★★★★
★★★★★
Stuart C - January 5, 2021
Verified Purchase
Worked as expected
Ease to install and it worked right away.
★★★★★
★★★★★
Debbie R - October 14, 2019
Verified Purchase
Easy repair and part worked as expected
Easy order, part came quick and it was an easy repair for my husband??
★★★★★
★★★★★
Bryan W - October 10, 2019
Verified Purchase
Great product and service
Ice maker was easy install and working again
★★★★★
★★★★★
Dale C - February 5, 2019
Verified Purchase
Repair went well.
Recieved damaged part but they sent another good one. Repair went well.
★★★★★
★★★★★
Earl A - August 31, 2018
Verified Purchase
Icemaker repair.
This was the perfect part for my repair. I read many site and watched videos, and after eliminating other possibilities, I bought this part. I have ice and plenty of it. Earl
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Removed and Replaced Ice Maker
Removed the cover to ice maker. Removed with 1/4 inch socket and the extension, the 2 Nutscrews holding the ice unit in place by bending down the plastic cross piece in front of the screws. Finally squeezing the electrical cover case to remove from the rear wall to get to the Electrical plug connection. Once cover away from the wall and
... Read more new plug connected, the new ice maker was hung onto the upper slots and nut screws re-installed, again by bending the plastic cross piece for ease of securing the unit. Re-installed the cover and turned the unit on - it made ice like when the refrigerator was new.
Read less
Albert from SANTA MONICA, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice maker assembly went bad.
I use a Screw drive a Nutdriver set Needlenose Pliers and it took 30mins to fix.
Garrett from RANDALLSTOWN, MD
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker Quit working
Got new part. Removed cover. Tape at top had to be pried loose from door.
Had to turn cup cover from top portion to access power wire. Door and light wires had to be unplugged and moved from clips.
Two screws at bottom removed. Motor unit was freed up and set on table.
Had to remove bottom white section d
... Read moreue to light Assembly was not on new section. Removed three screws. Removed three screws from new unit.
Attached old white section with light to new motor unit.
Reattached power wire routed into cup and plugged in. Cup turned clockwise so as to attach.Other wires re-routed and plugged back in.
Cover section screws inserted and reattached.
Turned on/off button back on. Checked all light switches in refrigerator and freezer section to ensure operating. Put bin back in and closed door. No warning lights present. Approximately one hour later, bin had ice in it.
Read less
Peter from DE KALB, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eric
June 4, 2019
I replaced the icemaker on my side by side Whirlpool gold fridge with a new icemaker. It made 2 batches of small ice cubes and quit. What could be the problem
Hi Eric, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 19, 2017
Hello do the wire covers for ice maker on the door just snap off. It feels like tabs or what ever is holding it on will break when i pry and pull on it. How does it come off? Also the number on my ice maker is w10251071 will this new motor kit fit mine. Its not in all the model numbers provided? Thanks jim
For model number GSF26C5EXB02
Hello Jim, Thank you for your inquiry. We do show that this part number is compatible to the model number you provided. Although we do not have a repair video for this exact part, I have included a link to a similar model to show you how to replace the ice maker https://www.youtube.com/watch?v=_6xfzzeEWyw&t=84s Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
April 28, 2018
My ice maker stopped making ice. I disassembled the door and there was ice in the tray, so i broke that up and removed it to ensure it wasn’t jammed. Still doesn’t work. Is replacing the assembly the next easiest step? Is there any way to test the thermostat?
For model number Ksf26c4xyy01
Hi Brian,
Thank you for your question. Yes you can test your thermostat with a multi meter to determine whether or not it is working correctly. You might have to take a look at your ice maker being the problem as well. It could be that the ice build up burnt out the motor or broke something else on your ice maker. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Hershel
February 26, 2020
Hi, the ice maker stopped making ice (all of a sudden). When i press the dispense button/arm you can hear the regular noise like its dispensing ice but no ice is being produced. The cold water dispenser is working fine. Which part do i need to replace? Thanks!
For model number GSS30C6EYY01
Hello Hershel,
Thank you for your question. Our sources suggest that the ice maker assembly under part PS11751133 for your model would need to be replaced to fix the ice maker issues with it producing ice. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Herman
March 14, 2020
My icemaker finally quit. I want to replace the entire icemaker. Do you have an instructional video on how to replace the entire icemaker for this model fridge? I brough in a repairman 2 months ago who replaced just the motor and it is broken again already. $400.00 wasted
For model number whirlpool gold model GSF26C5EXY00
Hello, Thank you for your question. There is a video on our website that you can reference on how to install the ice maker. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS869316. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Del
February 7, 2020
How do i get to the ice maker unit to replace it?
For model number WSF26C2EXF01
Hi Del. Please watch our video here: https://www.youtube.com/watch?v=_6xfzzeEWyw. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vernon
February 28, 2018
How to remove icemaker w10122575
For model number wpw10251076
Hi Vernon,
Thank you for your question. There is a video on our website that you can reference on how to install the ice maker. The refrigerator in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. You will find the video under part number PS869316. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
June 27, 2019
What ie the warranty on this part? Thank you jim
For model number PS11751133
Hello James, Thank you for the question. We have a 1 year warranty on the parts we sell. Please see the link below for our warranty policy. Hope this helps!
https://www.partselect.com/One-Year-Warranty.htm#
1 person found this helpful.
Was this helpful?
Thank you for voting!
Buck
September 6, 2017
How difficult is it to replace the entire icemaker assembly (part # w10251076) with a new one?
For model number KSC23C8EYY02
Hi Buck,
Thank you for your inquiry. I have found a video on our website that you may reference on how to install the ice maker. You will find the information under part number PS358591. I hope this helps. Thank you and have a great day!
My Whirlpool refer is 6 yrs old and I have had 2 ice makers and need another one replaced. Problem is that I start getting a lot and I mean alot of particulates floating in the water. Water is clear from the dispenser but when I take ice cubes from the bin, let it melt you can see these particles. My warranty is out of date and this is a reoccurring problem and possibly a bad health hazard. Are these ice makers still being made of the same material? Something is making these unit degenerate to a point that a will have to replace every 2 years. I need help in this and hope you can come up with a solution. If you want to see what I am talking about have your sales rep come by and I'll give him the sample. If this question goes to a different please lit me know.
For model number W10251076
Hi Fred,
Thank you for your question. The particles that you are seeing in your ice cubes are dissolved minerals such as calcium carbonate and magnesium carbontate. As water turns to ice, the particles become visible. This is normal in areas where there is hard water. These particles are harmless. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
