Upper Wash Arm Came Off

ApplianceKitchenAid Dishwasher

ModelKUDS01DJWH0

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Colin From Hudsonville, MI

Sep 26, 2012

With a flat blade screwdriver, pry up gently on the Upper Rack Track, pull out the end caps, and remove the rack. Pull the Feed Tube down out of the clip in the ceiling, Install the Upper Wash Arm on the Feed Tube, insert the Push-In Screw from below and push the Screw Cover down from above to snap everything together.

I also replaced the Lower Spray Arm Seal. First remove the Lower Dish Rack then remove the Lower Spray Arm by grasping the Lower Spray Arm Support/Hub and twisting the arm counter-clockwise to unscrew it, Pull the arm and hub out, now twist the Rear Feed Cap clock-wise to dislodge the Feed Tube and disconnect the cap. The seal is underneath.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Upper Wash Arm Mount

Part Number: PS392917

$23.12
In Stock

Spray Arm Seal

Part Number: PS392957

$3.96
In Stock