This manufacturer-certified Pan Slide Track allows the drawer to slide in and out. It measures roughly 12 inches in length If this track is damaged or missing, you won't be able to move the drawer properly. The slide attaches to the side wall of the fridge and can be placed on either side. Refer to your model number and user manual to ensure this part is right for you. To make this repair, first, remove the snack pan and glass shelf. Slide out the track from its locking pins on the side of the glass shelf, and slide the new track into place by lining it up with the locking slots. Replace the shelf and crisper drawer. This repair is rated as very easy by our customers, taking less than 15 minutes to complete and requiring no tools.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Refrigerator Pan Slide Track
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore.
Part# WP2223320 replaces these:
AP6006718, 2223320, WP2223320VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
114 Reviews
4.6
Filter By Rating:
5 Stars
85
4 Stars
17
3 Stars
8
2 Stars
2
1 Star
2
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ivan D M - October 11, 2023
Verified Purchase
Exact fit!
Just what was needed.
★★★★★
★★★★★
Jose R - August 9, 2023
Verified Purchase
Correct Part the first time!
The part was the correct one, and the instructions for installation very clear. I removed the old part easily, but could not get the new part by hand only. Had to tap it lightly and carefully with a hammer to make it fall into place.
★★★★★
★★★★★
Tina D - May 3, 2023
Verified Purchase
Perfect replacement part
Exactly what we needed to repair our drawer in our fridge.
Thank you
★★★★★
★★★★★
Lewis F - April 7, 2023
Verified Purchase
Easiest repair
This was the easiest repair I have every done. The site showed me the correct part needed and the video was spot on for how to do the replacement.
★★★★★
★★★★★
Jewell P - January 19, 2023
Verified Purchase
Old fridge part - Just what we needed
My friend is a good one and is 18 years old. This company had exactly what I needed for my slide drawer. It was easy to order, arrived quickly and fit perfectly. I would highly recommend PartSelect. I'd rate as a 10 if I could. Thank you! I will spread the word.
★★★★★
★★★★★
Martha S - December 3, 2022
Verified Purchase
Great Part
My refrigerator drawer glide worked great and easy to install!
★★★★★
★★★★★
CANDICE C - February 10, 2022
Verified Purchase
Thanks for the Video
After watching the video on how the replace these slide tracks we easily swapped out the old (broken) and popped in the new ones.
They are working great!
★★★★★
★★★★★
Joe M - January 10, 2022
Verified Purchase
easy repair worked as expected
THE PART WAS EASY TO ORDER LOOKING AT DIAGRAM
★★★★★
★★★★★
Susan M - November 16, 2021
Verified Purchase
Fixed and good as new
These tracks have renewed our much-used fridge snack drawer. The parts were great. They weren't super easy to replace but with the help of the online videos, we got it done. Very satisfied!
★★★★★
★★★★★
Nancy S - October 28, 2021
Verified Purchase
Works great
The part was delivered faster than I expected and was an exact fit. I'm grateful to be able to extend the life of my refrigerator with access to replacement parts.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 55 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Slide track required modification - Door cams installed easily
There were two small round studs in each slide track missing from the originals. Since there were no corresponding holes in the metal shelf bracket on my fridge, I ground off the plastic studs with a Dremel tool and the tracks fit perfectly.
My door would self-close anymore due to worn door cams. To fix I removed the door b
... Read morey unbolting the upper hinge and lifting the door off the lower hinge. I pried the cams off the door and the lower hinge and pressed the new ones into place. Added a dab of grease and reinstalled the door. Closes like new.
Remove old track with a flat blade screwdriver by Gently tapping on the tabs to unlock from the shelf bracket. Simply reverse the procedure to install the new track. I used a bench grinder to quickly remove the round button near the front of the track to keep the track flush to the mounting bracket of the glass shelf.
Raymond C from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Track broke in half on both sides
Taking the track off was fine, but putting it on was a nightmare. You have to push in and pull forward to get the tabs into place. For some reason they added a couple of notches on either side of the track that made it near impossible to budge and it warped the track when in place. We couldn’t do it with two people. Finally, I was able t
... Read moreo carefully shave down the notches and got one side on. The other side, I had to whittle down the tabs, too, and gently tap the plastic end with a hammer to get it to budge into place. It’s plastic, so I had to be extremely patient. So far it’s holding the drawer fine.
Read less
Danielle from DUBLIN, OH
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace broken pan slide track for deli drawer
Technically there are no specific tool requirements for this repair, but getting the old slide track off of the shelf and getting the new one on can prove to require some elbow grease that I found some tools helped ease. The track attaches with tension of 3 dado-type slide joints as well as 3 pegs to lock it in place once those joints ar
... Read moree aligned. I found use of a screwdriver to push the pegs out of their holes and then a hammer to force the piece to slide out of lock to help remove the old track. I then used the hammer again (lightly) to slide the new track into position so that the pegs would lock. I would stress though that this component being plastic, use of such tools should be done with great care if at all.
Read less
Ben from Lansdale, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
There were two nubs on the track which prevented them from fitting properly.
I filed the nubs down flat with the track. Worked like a charm from that point.
Michael from BEAUMONT, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer pan side track broke
I used a small hammer to gently tap the broken slide track out of the locked position. Then inserted the new one into the track and slid it slightly to lock it in place.
Brenda from FREDERICK, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom of Pan Slide Track broken .
New part had small tips on each end that had to be shaved down . Used broken part as guide to hammer new part in place .
JOE from KINGSTON, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Slides on drawer broke
Popped the old slides out. the new slides had extra small knobs(no holes for them) ground off unnecessary ones with dremel grinder. slide right in after doing this with no problem.
Dale from HENDERSON, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken support rail for sliding drawer
Remove sliding drawer. Remove glass shelf. Inspect the installation slots that the support rail is mounted through. Understand the direction you wish to apply force and then softly tap the rail and it will pop free. The same can be done for both sides. Interestingly, the parts are the same so you do not need a left and right rail if b
... Read moreoth rails are broken. In fact, they can be removed, flipped 180deg and reinstalled.
Read less
mark from ALACHUA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the Broken pan slide track
These slides are in a notched metal support arm and meant to slip forward into a groove and lock in place. The replacements are exactly the same with one small difference and that is two small pillars that are meant to apply tension so that the slide stays in place. Therefore you have to fit the new slide into its notch and groove hold an
... Read mored press it into the support in two places and then push the slide into its locking position. I found that doing this was difficult with only two hands as the plastic did not flex and the tension from the new unit was far greater than the old ones with out the tension pillars. Answer was simple; soak the new slides in very hot water for 5-10 minutes. This allowed the slides to be more flexible and slide and lock right into place.
Read less
larry from Purdon, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
July 20, 2017
I’m not sure if this is what I need but I snapped the white plastic track thing on the right hand side of my drawer/pan. It clips into the part at the back (I think it’s called the snack compartment). This is the top drawer of my fridge. Can I order this for the left and the right side, and is this what I need?
Hi Alex, you are right, this part is used to hold the snack drawer up and it connects to the fridge. This pan slide track WP2223320 can be used for the right and the left side of your snack drawer. I hope this helps!
51 people found this helpful.
Was this helpful?
Thank you for voting!
Carson
July 20, 2017
So I had to replace my pan slides (Whirlpool #2223320) and ordered two of them. With that said there are two round small pieces that stick out about a 1/4 inch round. These two small pieces won’t let the pan slides fit properly against the bracket. They also won’t let the small tabs slide in place. I noticed you and other sites recommend cutting off the round pieces, but how would you recommend me doing it without hurting myself or breaking the part.
Hello Carson, great question! The tabs can be removed by using side cutters (or a tool of a similar nature). The manufacturer is aware that for some models the tabs will have to be removed, so it should not be too difficult of a task. Please let us know if you have any further questions.
15 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
January 17, 2018
Reference p/n wp2223320 i need to replace both sides of the pan slide tracks for the deli tray. It doesn't specify right or left side. I need both sides. Is there a different part number for the left and right side or is it the same?
For model number EC3JHAXRL00
Hi Mike,
Thank you for your question. This part can be used on either side of the glass shelf. I hope this helps. Thank you and have a great day!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Geo
July 20, 2017
The pan slides on my fridge have broken few times and ive replaced them before. This time however I am unable to install them because they donot lineup properly. It looks like it should, but it wont budge. I bought a few incase I got a weirdly malfunctioning part but they all look the same. I know this is the right part, how do I install it……..
Hi Geo, the pan slides WP2223320 have been redesigned by the manufacturer. Although it is still made to work with your model refrigerator. If the pins seem to be getting in your way you can cut them off and still use this part as directed. Some models require all 3 pins whereas other do not need any of them. Best of luck with this repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Gus Abella
November 30, 2018
Does the pan slide track model no 2223320 fits either the left or right side of the drawer?
For model number GS5SHAXT
Hello Gus, Thank you for your inquiry. Yes, this part will fit either the left or right hand side. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Marty
May 13, 2019
I need to replace both tracks on the deli pan of my refrigerator. I think the part is #2223320. Is that correct? And, is there a left and a right, or does the same part fit both sides?
For model number 44323400
Hello Marty, thank you for inquiring. This Pan Slide Track is the replacement for both sides of the Snack Pan on your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ellen
July 31, 2019
I am unable get the old part out. The locking pins do not seem to unlock. Any suggestions? I followed the video about pulling out the locking pins, but it does not work like the video. Thanks, Ellen
For model number GS6SHAXML00
Hi Ellen,
Thank you for your question. The pan slides, part number WP2223320, have been redesigned by the manufacturer. Although it is still made to work with your model refrigerator, if the pins seem to be getting in your way you can cut them off and still use this part as directed. Some models require all 3 pins whereas other do not need any of them. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
October 23, 2019
Does this come with both the left and the right side? Or do i have to buy two of them?
For model number GS5SHAXNT00
Hello Michael, thank you for your question. This replacement Pan Slide Track for your model refrigerator is used for both sides, but is sold individually. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Angie
September 22, 2022
I need to also replace the part the slider fits on (shelf holder), but can't find that part. Can you help?
For model number GS5SHAXSL01
Hello Angie, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12578346. We hope this helps, good luck with this repair!
Will this pan slide track work on this model refrigerator? It is 20 years old.
For model number GC5SHEXNS
Hello Jennifer, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
