Washer took much too long to fill with cold water.

ApplianceKenmore Washer

Model11092588210

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers
Screw drivers

John From Florissant, MO

Sep 22, 2012

Unplugged the machine and turned off the water, (hot and cold), removed hoses from valve. Removed two screws holding console to top. Removed screws in rear holding rear panel to cabinet. Pulled cabinet out of the way. Disconnected electrical leads from valve solenoids. Used nut driver to remove screws removed valve and mounting plate from the back of machine. Pliers compressed snap ring holding fill tube to valve. I reversed the procedure to reassemble. Most difficult part was getting the cabinet back in it's place. Washer fills like it is brand new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Mounting Bracket

Part Number: PS334646

$17.97
In Stock