not enough heat

ApplianceAmana Dryer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Pliers
Screw drivers
Socket set

Stan From Davis Junction, IL

Sep 19, 2012

I removed the front lower panel and could access the parts easily. This model of dryer was a little tricky as to what needed to be removed to access the parts. It was easy to take off the flame sensor and the therminal gas valve and replace. I watched your video on changing these parts but it didn't help much as the model in your video was newer and the parts were not in the same location on my dryer. the top on my dryer could not be popped up it was held by screws accessed by working from the bottom panels up. It turned out I only needed to take off the bottom kick panel to replace the parts it needed. The dryer works fine and the information,you provided on your website about what parts cause this problem most of the time on this dryer helped me to order the correct parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Two Terminal Gas Valve Coil (Now subbed to 'M' Series New Style Coil Kit)

Part Number: PS334310

$14.26
In Stock

Radiant Flame Sensor

Part Number: PS344761

$25.16
In Stock