Noisy motor, worn out bearing

ApplianceKitchenAid Dishwasher

ModelKUDP01ILWH

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set
Wrench set

Daniel From Menlo Park, CA

Sep 19, 2012

I followed the attached youtube video. I did not have to disconnect the wire harness. Unplugging the power cord allowed the dishwasher to be removed for repair. The bolt holding the motor in place is somewhat difficult to get to because it is behind a shield. A socket with an extension is necessary. The motor required more effort to dislodge than indicated in the video. Once the bolt is removed and the motor is rotated, wiggling and pulling was necessary to break the seal loose. Be sure to line up the arrows on the motor and collar before reinstalling.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Circulation Pump Motor with Impeller - 60Hz 120V

Part Number: PS2363114

$137.62
In Stock