No Power from Touch Pad

ApplianceWhirlpool Range


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Beth From Osseo, MI

Sep 19, 2012

8 out of 9 people found this instruction helpful

Burners still worked but nothing in the oven because the touch pad had no power due to an electrical storm. I removed 6 screws from the back and then two screws from the circuit board and 3 connectors. Removed the old circuit board and put the new one in. Reconnected the 3 connectors and checked to see if that fixed the issue. Hardest part was getting the back plate back on. I would do this again - replacement part was around $100 and a new range over $300.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Control Board with Overlay - White (Now subbed to Electronic Control Board)

Part Number: PS8260001

Recycling Rebate Available
In Stock