one of the 4 burners wasn't sparking

ApplianceGeneral Electric Cooktop

ModelJGP328

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers
Screw drivers

Arthur From Bloomingdale, IL

Sep 14, 2012

out of people found this instruction helpful

I used a hex wrench to remove the 8 screws ( 2 on each burner ), pulled up the knobs, and lifted the ceramic top. use pliers to disconnect the spark plugs. I disconnected the switch harness from the igniter, disconnect the igniter wires remembering the color scheme.My igniter had a minor variance from the old one which an acompanying map clarified. I installed the new switch harness and the new igniter, made the igniter connections according to the color scheme and the accompanying diagram, replaced the ceramic top, pulled spark wires thru, installed the burners and the spark plugs, tightened the 8 screws, and tested the burners.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Burner Gasket

Part Number: PS227128

$3.76
In Stock

Spark Igniter

Part Number: PS231363

$17.09
In Stock

Burner Gasket

Part Number: PS232502

$4.21
In Stock

Spark Module - (4+0)

Part Number: PS952864

$32.82
In Stock

Spark Igniter Switch and Harness Assembly

Part Number: PS953094

$22.21
In Stock