When turning the over on to bake it would not get any hotter than 125 degrees

ApplianceKenmore Range

Model362.75889891

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Charlie From Blairstown, NJ

Sep 13, 2012

out of people found this instruction helpful

I was an easy fix on my unit due to my wiring access. All I needed to do was slide to all the internal racks and remove the cover at the bottom on the over. To access my wiring I removed the Broiler draw and then I was able to unplug the A/C 110 volt plug. Then I could see the two wire plug for the Igniter, so discounted that and removed the two screws holding the Igniter, remove it. Then placed the new one in place of the old one, installed the two screws and plugged in the Igniter plug. I then re-assembled the oven and plugged the A/C 110 volt plug and turned on the over to bake at 350 degrees and it worked perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter Kit

Part Number: PS231280

$35.87
In Stock