Pump valve leaking

ApplianceGeneral Electric Dishwasher

ModelGSD5920D01BB

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Wrench set
Nutdriver
Screw drivers

Richard From Livermore, CA

Jan 22, 2008

0 out of 2 people found this instruction helpful

I disconnected the water line on the left-front. Disconnected the drain line at the air-break. I removed the AC power-in box on the right front and disconnected the power lines going to the unit. I took out the two screws holding the unit to the cabinet (above the door) and slid the unit out onto a drop cloth (protect the floor; some water spills). Pulled the unit out and turned over. Followed the directions with the motor & pump valve kit, which were very easy to follow. Then reversed the above. Nut drivers are a must for this job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Motor and Pump Kit

Part Number: PS260801

$146.32
In Stock