Ice Maker would not dispense or crush ice

I took the ice tray out of the brackets. Then, I removed the bracket from the right side (3 screws). I removed the back panel (4 screws). Needed to pop the right hande connecter off of it. I tried to get the back connector. Probably should have just removed all the connections from the back panel. Instead, I just removed them from the motor. The motor itself had three screws that I took off. I pulled out the motor and put the new one in. Had some trouble lining the screw holes of the motor with the back panel. If I would have removed the other connections, I could have taken the whole back panel out and lined up the screws easier. I put everything back together in the opposite order I tool it apart. Gave it a try and it worked.