Dryer wouldn't start

ApplianceRoper Dryer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Rocco From Moon township, PA

Sep 04, 2012

out of people found this instruction helpful

After doing on line research at other sites, I bought an inexpensive multimeter, took off the back of the dryer, and started trying to figure out what part wasn't working. I might as well have tried to diagnose a jet engine problem, I didn't have a clue. Then I went to the Part Select site, and their stats showed that in 50% or so of the cases where a Roper doesn't start, you need a thermal fuse, and should also replace the cycling thermostat while you're at it. The "how-to" video showed me exactly what the parts look like, and where they are in the machine, and the cost of the parts plus delivery was less than $50!! It was worth taking the chance for $50. The parts came in two days, were installed in five minutes, the dryer works and I'm thrilled! Part Select is the absolute best. This is the first appliance repair I've ever done. I would never have done it without you. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Cycling Thermostat

Part Number: PS344510

$18.12
In Stock

Thermal Fuse

Part Number: PS345113

$12.52
In Stock