Clothes damp after cycle was complete

ApplianceWhirlpool Dryer

ModelGGW9250PW3

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Gregory From Tinley Park, IL

Sep 02, 2012

Replaced the thermistor, thermostat, moisture sensor and the moisture sensor wire harness and the problem did not clear up. Tested both coils on the gas valve and the ohms readings for all 3 tests were within range. The burner would light and work until it shut off for the 1st time, it would attempt to relight but the gas valve would not open. Replaced the coils with Part # PS334310, 'M' Series New Style Coil Kit and the problem was corrected.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Moisture Sensor

Part Number: PS344525

$3.76
In Stock

Moisture Sensor Wire Harness

Part Number: PS346793

$41.32
In Stock