Soap dispenser door would not latch

ApplianceWhirlpool Dishwasher

Modelgu2500xtps3

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

WILLIAM From PORT ST. JOE, FL

Aug 29, 2012

Open the door and let it all the way down. Take the (4)T-15 torx head screws out of the door along each side. It is not necessary to take the (6) screws out of the upper control panel. The outer door skin will drop down. Raise the door and then pull the outer door skin up and set it aside. remove the (6) 7MM/3/16" screws, plastic flap,and the flanges from the dispenser. Remove the 2 wires noting the color codes and locations. There is a assembly clip on the dispenser. pry the clip up and pull the dispenser out of the door. reverse steps for assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Detergent and Rinse Aid Dispenser

Part Number: PS973797

$50.59
In Stock