water would not drain after wash cycle

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

susan From pompano beach, FL

Jan 19, 2008

0 out of 2 people found this instruction helpful

I removed the two screws to the control panel, tilted it back, unpluged the old element, removed the two metal clips holding the outside housing then pulled it away from the washing machine. I then removed the two screws holding the element. I used a screw driver to lift the clasp holding the wires. Once the old element was removed I put in the new element. The hardest part was getting the housing back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lid Switch Assembly with Leads

Part Number: PS350434

$30.40
In Stock