Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rich
December 2, 2019
My GE dryer (model dpse810eg4wt) wouldn’t start one day despite dial lights acting normal.Took the machine apart, had motor bench tested (a ok) and tested door switch and every other fuse, thermistor, etc., that i could find and identify with the wiring diagram. all checked out though i do need to re test the inlet control thermistor. my question, do you think i should buy a new control board? can the digits on my current control board light up and the board still be bad and be responsible for motor not starting?
For model number DPSE810EG4WT
Hi Rich, thank you for your question. If you have tested all of your heater, thermostat, thermistor, door switch, and motor then the only other part that would cause the issue would be your control board. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Amanda
February 5, 2020
Does this part come assembled?
For model number DPSE810EG4WT
Hello Amanda, Thank you for the question. The two boards come assembled with the Ribbon cable connecting them. We hope this helps.
Was this helpful?
Thank you for voting!
John
November 21, 2022
My GE Profile Dryer will not stop running. When I set the timer for 10 mintues I can see the time clicks down to zero but the dryer doesn't turn off. Sounds like the timer is bad, but when I look up the model I can see a timer listed. Is there a timer for this unit or is it built into the control board assembly?
For model number DPSE810EGOWT
Hello John, thank you for contacting us. In your dryer, the drying time is controlled and managed by the control board assembly, part number PS3487030. It also manages temperature functions. We would also recommend checking the moisture sensor, part number PS1021860. Please reach out to customer service if you need help placing an order. Glad to be of help!
