washer would not go thru it's cycles,power surge!

ApplianceFrigidaire Washer

ModelFTF2140FS1

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Screw drivers

ROBERT From JACKSON, MI

Aug 14, 2012

REMOVED TOP BY REMOVING SCREWS IN REAR. REMOVED FRONT PANEL. REMOVE CONTROL PANEL FROM FRONT PANEL. REMOVE PRINTED CIRCUIT BOARD.FOUND PRINTED CIRCUIT BOARD WITH MELTED PART FROM THE POWER SURGE. ORDERED PART. MARK THE ELETRICAL PLUGS,AS YOU REMOVE THEM SO YOU PUT THEM BACK IN ORDER. DO NOT TIP FRONT OVER, YOU'LL LOOSE THE LITTLE SPRINGS THAT PUSH BUTTONS OUT! ALIGN TWO SHAFTS SO BOARD WILL GO BACK TOGETHER. REASSMBLE IN OPPOSITE ORDER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Board with Housing

Part Number: PS2330930

$184.54
In Stock