squeeking like crazy

ApplianceKenmore Dryer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Wrench set
Screw drivers

Steve From Wheelersburg, OH

Jan 18, 2008

48 out of 54 people found this instruction helpful

well, i started at the top and worked my way down. by taking the top off, it gave me more room to get the dryer tub out. took the two screw`s out of the vented plate on the back of the machine to undo the belt. this is a stackable washer-dryer combo, so next i took off the white plate on front between washer & dryer. took off the control panel, unpluged it, then took dryer door front off. then removed the two screw`s that hold that bracket on ,in the back of dryer, pulled the drum out & replaced the belt, but before replacing anything i took the shopvac to it , there was alot of lint in there.when replacing the Grounding Ball Clip & Grounding Ball, i took a one inch by two inch magnet and used it to hold the Grounding Ball & Clip in place so i could get the two screws started in the Drum Support Bearing & Bearing Bracket. after installing that i put the shaft in place & lined the dryer tub up with the 3 screw hole`s ,and boom, bang, pow...nothing to it. it`s easy...parts came very fast....Thx PartsSelect.com...i`ve told all my friend`s about PartsSelect

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bearing Bracket

Part Number: PS418632

$8.29
In Stock

Ball Hitch

Part Number: PS418736

$34.34
In Stock

Drum Support Bearing

Part Number: PS418807

$2.77
In Stock

Grounding Ball

Part Number: PS459766

$6.93
In Stock

Grounding Ball Clip

Part Number: PS459767

$6.59
In Stock

Dryer Drum Drive Belt (Now subbed to Multi-Rib Drum Belt)

Part Number: PS3408299

$10.26
In Stock