BAd Noise & finally pump Locked up

ApplianceMaytag Washer

ModelTopLoadWasher

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Pliers
Screw drivers

Fred From Marissa, IL

Aug 12, 2012

I thought the noise was the thrust bearing. Replaced it but didn't fix. Washer worked but hstill had terrible noise. Went shopping for new washer - then pump locked up. I siphoned out the water (good idea) and folled ditections I found on this site. 1. pryed up top with screwdriver. Raised lid. 2. Removed the 2 front panel screws with a nutdriver. 3.Removed hose clamps from pump with pliers. 4. Removed 3 screws holding pump. 5.Replaced pump in reverse order. 6. Crossed fingers - it works fine - saved $800.00

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump with Pulley

Part Number: PS2347187

$44.48
In Stock