CLEAN WATER LEAKAGE AT BOTTOM OF DOOR

AFTER REPLACING THE DOOR FOAM STRIP AND THE SOAP DISH GROMMET I STILL HAD THE WATER LEAKAGE AT THE BOTTOM OF THE DOOR, IN FACT A BIT MORE LEAKAGE. THEN I REPLACED THE FOAM INSULATOR STRIP ON THE INNER DOOR. STILL HAD THE LEAKAGE! I OPENED THE DOOR AFTER THE WATER FINISHED THE FILL CYCLE AND NOTICED THE WATER LEVEL WAS UNUSUALLY HIGH. APPARENTLY THE WATER FLOAT WAS PARTIALLY STUCK ALLOWING AN OVER FILL. I PUSHED ON THE FLOAT DOWNWARD A FEW TIMES AND REMOVED SOME OF THE WATER AND RE-RAN THE WASHER. THE LEAK WAS REDUCED TO A FEW DROPS. REMOVED THE FLOAT AND SOAKED IT IN VINEGAR TO CLEAN IT AND THIS CURED THE PROBLEM.