Level of DifficultyA Bit Difficult
Time to do repair1- 2 hours
Age of Appliance5 - 10 years
John From Kittery, ME
Aug 07, 2012
out of people found this instruction helpful
Disconnect Power, then water supply and drain lines. Remove all hex head screws holding rear panel onto machine. Unsecure white plastic tab on bottom of rear panel by twisting and pushing through rear panel. Remove 2 screws securing control panel to top of machine. Swivel panel up, remove two gold colored (zinc flashed) steel clips that hold panel to machine. Rear panel should be mostly detached from the rest of machine, complete disassembly by pushing water dispensing manifold tabs through slots in rear panel and by removing electrical connections and water lines from faulty water inlet valve. Assemble new inlet valve, install in reverse of removal.