Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Maytag, Amana.
Part# W10756689 replaces these:
37001167, 37001286
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 7 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
timer would shut off after a few minutes.
received part day after we ordered the control board. My husband was working that day, so I installed it myself. Was pretty easy to do. I took a picture of how the old one was connected, and then I took the old one out, and put the new part in. It now works great. Thank you we saved 150.00 installing it ourself.
fran from bethlehem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric Dryer would only run a few seconds.
Researched problem on line. Many others had same symptums after power outages and Hurricane Irene. Dryer was in use when power went off, back on, back off than on again. Dryer would not work more than a few seconds. LED lights would go off; Drum did spin; Heater elements came on. All symptoms pointed to the control board. Replaced bo
... Read moreard and dryer is working now. Reports state that this particular control board is very susceptable to power bumps and will fail.
Read less
Timothy from Ellicott City, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would turn on but would only run a few minutes and turn off.
Could not have been easier! Removed 3 screws above the control panel which allowed the removal of the front of the panel. The control board was only held on by 2 tabs....no screws, and removed easily. Simply transferred all the leads from the old board to the new one, there were only 5 or 6, then snapped new board in, reconnected the pane
... Read morel, and 3 screws later I had a completely functioning dryer again. For this Sears was going to charge me $160.00 for the part and $160.00 for labor!
Read less
Jorge from Topsfield, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel of the dryer got fried
My husband got a screwdriver to open the dryer control panel. He pulled the burned control board out and put the new one in that we got from partselect.com. We tried the dryer and it worked! I took like five minutes to install. It was so easy! It saved us $130 by not calling a service technician to come over and check the machine.
jocelyn from gaffney, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would start then shut off after a few seconds
Back panel removes easily. Remove control board wire connectors(remembering where they go is tricky) attach new board plug in wires and presto!
Matt from Warrenton, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not stay running longer than 15 seconds.
First, I removed the screws from the top of the panel. I removed all wires from the control board and attached them to the new control board. I then snapped the new board in place. SUPER EASY!!! Tightened screws on top panel and tested dryer. Works like a charm!
Jeremy from Imperial, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would run 15 seconds and shut off. Could turn right back on and again it would shut off after 10 to 15 seconds.
Unscrew 3 screws at the top of the dryer. Remove face plate and discounted 6 leads connecting them to the new control board as you take them from the old one.
Angela from Hartselle, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
22 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
September 16, 2017
How do the control knobs come off so I can remove the face plate to access the board?
For model number MDET446AYW
Hello James,
Thank you for your question.
To remove the knobs you would just need to pull them off. You should not need any tools to remove or replace them.
Best of luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Thomas
May 6, 2018
Dryer will not start. Already replaced start switch
For model number 110.69822801
Hi Thomas, Thank you for the question. I suggest testing the Door switch PartSelect Number: PS11741701 and the Thermal Fuse, PartSelect Number: PS11741460. You can test the parts with a multi meter to check for continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
HORST
December 6, 2018
Gas valve does not activate. High limit thermostat, cycling thermostat, radiant sensor and igniter are all good. Is the heater\gas valve relay faulty?
For model number MDG4806AWW
Hello Horst, Thank you for the question. If all the other parts tested to be good and the Igniter is giving off enough volts to open the valve, The valve may be defective and need to be replaced. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Danny
July 20, 2017
Dryer will start. Runs 15 sec and shuts off. Heat setting are on fluff no heat
For model number Sears Maytag MDE4806AYW
Hi Danny, thanks for the question. When this model of dryer shuts off too soon or will not produce heat, it is most commonly a result of a bad high limit thermal fuse (part #: PS11742274). However, we do recommend checking our repair guide to determine what other parts may be to blame. Thank you for the inquiry, and good luck with your repair.
Was this helpful?
Thank you for voting!
Jim
March 18, 2023
Had a power outage today and after power came back on the dryer the power control light was on in the regular mode after turning to the power off the lights would flash and turn back on in the regular mode then I tried turning the control to time dry and dryer started ok but after a few seconds dryer would shut off and go back to the regular mode.
For model number MDET44gAYW
Hi Jim, thank you for reaching out. Based on our research, we recommend you check the following parts: the high-limit thermal fuse, part number PS11742274, and the cycling thermostat, part number PS11743793. If the issue persists, you may need to replace the control board, part number PS10064571. Good luck with your repair!
