Washer was making a clicking sound during wash and spin cycles.

ApplianceMaytag Washer


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Socket set

Theodore From Jacksonville, FL

Jul 28, 2012

Unplug the power cord and hoses. Pull washer away from the wall, tilt it backwards, reach under the washer and remove the belt.The motor has a spring loaded pulley which allows slack to roll the belt off. Turn the washer to the back is faceing you. There is a small panel with four screws in the lower left corner, take them out and remove the panel. Then you will see the drain pump. Remove the two hoses, the three screws holding the pump assembly. Remove the bad pump, and install a new one. Assemble every thing in reverse order, and sart washing.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drain Pump with Pulley

Part Number: PS2347187

In Stock