The tab which held the bottom drawer lid opened broke

ApplianceJenn-Air Refrigerator

ModelFrenchdoorbottomfreezer

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers
Socket set

Christopher From Gaithersburg, MD

Jul 18, 2012

I removed the bottom pantry drawer, the lid, the two drawers above the bottom drawer, the glass shelf above the bottom drawer, and the plastic supports for the glass shelf. I used the socket set to remove the sliding metal tray, I installed the sliding metal tray piece on the new end cap. Then I removed the two bolts that held the plastic "pantry end cap" in place. Once those bolts were removed, I carefully pulled the end cap into the center of the fridge to separate temperature control rod from the back of the fridge. There is a piece of angled plastic that holds it in place. Once I had that whole apparatus removed (there are three parts) I had to carefully angle the plastic piece to disconnect the temperature control rod from the old end cap, and install it on the new end cap. So long as you are careful and do not force it, it is very straight forward. You do not need to bend or force anything to get it separated and re-installed. Once I had the temp control rod moved over, I installed the angled plastic piece in the back, then angled the end cap against the side wall, then installed the two bolts that hold it in place. Then I put the pantry drawer, shelf, and other drawers back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Pantry End Cap - White - Right Side

Part Number: PS2365148

$19.55
In Stock